ContemporaryEasy Installation
Hole Centers: 1-1/4 in (32 mm) CTC
AMZ - 80279 Antique Brass Cabinet Pulls CTC 1 - 1/4 in (32 mm) 2 Pack
$8.99/ 2 Pack
$4.50 / pc
SKU: AMZ-80279-AB-32-2PK
In stock
Eligible U.S. orders are fulfilled through our U.S. fulfillment network. Estimated delivery: 3–5 business days.
Finish: Antique Brass
Pack size
Number of packs
1
- Category
- Cabinet Hardware
- Subcategory
- Cabinet Pulls
- Material
- Zinc Alloy
- Style
- Contemporary
- Room
- Kitchen
- Hole Centers
- 1-1/4 in (32 mm) CTC
- Color
- Antique Brass
- Pack
- 2 Pack
- Installation
- Screw Mounted
- Screws
- #8-32 screws included: 1" & 1.5"
- Application
- Cabinets and drawers
ContemporaryEasy Installation
Product Overview
khtumeware 10-Pack Champagne Bronze Heavy-Duty Solid Cabinet Pulls, 3-1/2 Inch (89mm) Hole Center, Satin Brass Drawer Pulls, Cabinet Hardware, Suitable for Kitchen Cabinets, Bathrooms and Dressers
Key Features
- Zinc Alloy construction with Antique Brass finish
- Contemporary design
Dimensions
- Hole Centers: 1-1/4 in (32 mm) CTC
Finish & Material
- Finish: Antique Brass
- Material: Zinc Alloy
Package Options
Prices below are pack prices for the selected finish and size.
- 2 Pack: $8.99 ($4.50 / pc)
- 5 Pack: $16.99 ($3.40 / pc)
- 10 Pack: $29.99 ($3.00 / pc)
- 20 Pack: $49.99 ($2.50 / pc)
- Screws: #8-32 screws included: 1" & 1.5"
Mounting Screws & Installation
Included Hardware
Mounting screws are included with every handle. Two different screw lengths are provided to fit most standard cabinet doors and drawer fronts.
- 2 pcs × #8-32 UNC screws (Short 25mm / 1")
- 2 pcs × #8-32 UNC screws (Long 38mm / 1.5")
#8-32 UNC · 4mm threaded hole
Compatible with
- Cabinet doors
- Drawer fronts
- Furniture panels
Fits Cabinet Thickness
- Choose the correct screw length according to your cabinet door or drawer thickness.
- Short screws are suitable for panels about 18–20mm (0.7–0.8") thick.
- Long screws are suitable for panels about 28–34mm (0.9–1.2") thick.
- Before installation, confirm the panel thickness and select the appropriate screw length.
Installation Guide
- Measure the center-to-center hole spacing of the handle.
- Mark and drill mounting holes on the cabinet door or drawer front.
- Insert screws from the inside of the cabinet panel.
- Thread screws into the handle mounting holes.
- Tighten with a screwdriver until secure. Do not overtighten.
Important Notes
- Screws are designed for standard cabinet installation.
- Confirm screw thread type before installation.
- Do not force incorrect screws into threaded holes.
- Avoid over-tightening to prevent damage to the handle finish or cabinet surface.
- For custom thickness panels, additional screw length may be required.
Where to Use
Cabinets and drawers
FAQ
- Will this fit my existing holes?
- Compare the hole centers or diameter listed above with your current hardware before ordering.
- Are screws included?
- Yes. Mounting screws in two lengths are included unless otherwise noted on the product page.
- What screw size is included?
- This product includes #8-32 UNC machine screws in short (25mm / 1") and long (38mm / 1.5") lengths.
- What cabinet thickness does it fit?
- Short screws suit about 18–20mm (0.7–0.8") panels; long screws suit about 28–34mm (0.9–1.2") panels. Confirm your panel thickness before install.
- Can longer screws be used for thicker panels?
- Yes, for custom or thicker panels you may need longer screws of the same thread type. Do not force a mismatched thread.
Wholesale & Bulk Orders
Planning a trade, wholesale or OEM order? Send SKU, finish, quantity and destination for project confirmation.