Khtumeware - 18APP Antique English Brass Appliance Pulls CTC 18 in (457 mm)
$49.99/ 1 Pack
Finish: Antique English Brass
Hole Centers: 18 in (457 mm) CTC
Pack size: 1 Pack
- Category
- Cabinet Hardware
- Subcategory
- Appliance Pulls
- Material
- Zinc Alloy
- Style
- Contemporary
- Color
- Antique English Brass
- Pack
- 1 Pack
- SKU
- 18APP-AE-1
Product Overview
Khtumeware | Appliance Handle Pull | Polished Brass | 18 in (457 mm) Center-to-Center Polished Gold Drawer Pull | 1 Pack| Kitchen and Bathroom Cabinet Hardware | Furniture Hardware
Key Features
- Zinc Alloy construction with Antique English Brass finish
- Contemporary design
Dimensions
- Hole Centers: 18 in (457 mm) CTC
Finish & Material
- Finish: Antique English Brass
- Material: Zinc Alloy
Package Options
Prices below are pack prices for the selected finish and size.
- 1 Pack: $49.99
- Screws: #10-24 screws included: 1" & 1.5"
Mounting Screws & Installation
Included Hardware
Mounting screws are included with every appliance pull. Two different screw lengths are provided for common appliance door thicknesses.
- 2 pcs × #10-24 UNC screws (Short 25mm / 1")
- 2 pcs × #10-24 UNC screws (Long 38mm / 1.5")
#10-24 UNC · 5mm threaded hole
Compatible with
- Refrigerator handles
- Dishwasher handles
- Large appliance doors
Fits Cabinet Thickness
- Choose the correct screw length according to your cabinet door or drawer thickness.
- Short screws are suitable for panels about 18–20mm (0.7–0.8") thick.
- Long screws are suitable for panels about 28–34mm (0.9–1.2") thick.
- Before installation, confirm the panel thickness and select the appropriate screw length.
Installation Guide
- Measure the center-to-center hole spacing of the handle.
- Mark and drill mounting holes on the cabinet door or drawer front.
- Insert screws from the inside of the cabinet panel.
- Thread screws into the handle mounting holes.
- Tighten with a screwdriver until secure. Do not overtighten.
Important Notes
- Screws are designed for standard cabinet installation.
- Confirm screw thread type before installation.
- Do not force incorrect screws into threaded holes.
- Avoid over-tightening to prevent damage to the handle finish or cabinet surface.
- For custom thickness panels, additional screw length may be required.
Where to Use
Cabinets and drawers
FAQ
- Will this fit my existing holes?
- Compare the hole centers or diameter listed above with your current hardware before ordering.
- Are screws included?
- Yes. Mounting screws in two lengths are included unless otherwise noted on the product page.
- What screw size is included?
- This product includes #10-24 UNC machine screws in short (25mm / 1") and long (38mm / 1.5") lengths.
- What cabinet thickness does it fit?
- Short screws suit about 18–20mm (0.7–0.8") panels; long screws suit about 28–34mm (0.9–1.2") panels. Confirm your panel thickness before install.
- Can longer screws be used for thicker panels?
- Yes, for custom or thicker panels you may need longer screws of the same thread type. Do not force a mismatched thread.
Wholesale & Bulk Orders
Planning a trade, wholesale or OEM order? Send SKU, finish, quantity and destination for project confirmation.